The solution lies in the use of “digital twin”
Posted: Sun Feb 02, 2025 5:44 am
The project partners are certain that if the technical possibilities offered by digitalization were better utilized, wind turbines could be operated in a more environmentally friendly and economical way. In their research and development, they rely on the "digital twin." This is the virtual image of a real, physical system such as a wind turbine. In the WindIO project, the digital twin will represent the dynamic model of the "Krogmann 15-50" research wind turbine at the IALB in Bremerhaven. A second research wind turbine at the University of Bremen is also being used for WindIO research, a 3.4-megawatt turbine operated by the project partner Deutsche WindGuard.
prediction of operating behavior and service life
In order to digitally map the real conditions in real time belarus gambling data , operating data must be permanently recorded and fed into the digital twin. This requires a large amount of sensor data. If the mechanical and electrical components are connected to an information processing system via a communications network, the system is referred to as a cyber-physical system (CPS). The digital twin is a special application of a CPS. It supports tests and forecasts - from production and logistics to wind turbine operation and the final recycling of wind turbines. The link with weather and load forecasts allows, for example, a prediction of operating behavior and service life. The behavior of systems or their individual components in real operation can thus be better predicted.
prediction of operating behavior and service life
In order to digitally map the real conditions in real time belarus gambling data , operating data must be permanently recorded and fed into the digital twin. This requires a large amount of sensor data. If the mechanical and electrical components are connected to an information processing system via a communications network, the system is referred to as a cyber-physical system (CPS). The digital twin is a special application of a CPS. It supports tests and forecasts - from production and logistics to wind turbine operation and the final recycling of wind turbines. The link with weather and load forecasts allows, for example, a prediction of operating behavior and service life. The behavior of systems or their individual components in real operation can thus be better predicted.